Countersunk Neodymium Ring Magnet 12 x 9.8 x 5.1 x 10 mm N48, South Pole

Countersunk Neodymium Ring Magnet 12 x 9.8 x 5.1 x 10 mm N48, South Pole

The Countersunk Neodymium Ring Magnet 12 x 9.8 x 5.1 x 10 mm (0.47" x 0.39" x 0.20" x 0.39") N48, South Pole is a neodymium (NdFeB) magnet in grade N48 with a nickel coating (Ni-Cu-Ni). It has an outer diameter of 12 mm (0.47") and a height of 10 mm (0.39"), with a 5.1 mm (0.20") through hole and a 9.8 mm (0.39") countersink, so it can be screwed on flush with a countersunk screw. It is magnetised axially through its height; the countersunk side is the south pole. Combine it with the North Pole version if two magnets have to attract each other face to face. Screw it onto wood, plastic or panels for cabinet and door catches, covers and panels, signage and displays, tool holders and jigs.

N48 is one of the higher grades of neodymium and gives a high holding force for its size (N50 and N52 are stronger still). The holding force is highest when the magnet sits directly on a thick, flat steel plate; it is lower on thin or painted steel, on rough surfaces or with an air gap.

• Dimensions: Ø 12 x 10 mm (0.47" x 0.39"), countersink Ø 9.8 mm (0.39"), hole Ø 5.1 mm (0.20") (12 x 9.8 x 5.1 x 10 mm (0.47" x 0.39" x 0.20" x 0.39"))
• Countersink on the south pole
• Grade N48 neodymium (NdFeB) with nickel coating (Ni-Cu-Ni)
• Maximum operating temperature 80 °C (176 °F)

The nickel coating protects the magnet against corrosion in dry, indoor conditions. For damp or outdoor use, seal or shield the magnet.

Please handle with care: neodymium magnets are brittle and can chip or break if they snap together, and they can pinch fingers. Keep them away from children, pacemakers and sensitive electronics.